Marathon Sprint Series Instrukcje Operacyjne Pobierz pdf (Strona 31)

Disassembly

Observe safety instructions!

The sequence of operations is identical to that described in the Section

entitled "Installation" but in reverse order. The setting procedures described

are not applicable.

Correct disposal

Observe appropriate local regulations!

Warranty and after-sales service

The warranty granted complies with statutory requirements. Contact your

local stockist for any warranty claims. Warranty entitlements only apply to

the country in which the given drive was purchased.

Batteries, fuses and bulbs are not covered by the warranty.

If you require after-sales service, spare parts or accessories, please

contact your specialist retailer.

We have made every effort to ensure that these instructions are as clear

and concise as possible. However, if you have any queries or wish to com-

ment on this document, please contact us with your suggestions:

Fax.: 0049 / 7021 / 8001-403

e-mail: doku@sommer.eu

Miscellaneous

Important information

Never use a hose or a high-pressure cleaner to spray down the

drive or the control unit housing.

• Always disconnect the mains plug prior to working on the drive mecha-

nism.

• Never use lyes or acids for cleaning purposes.

• Wipe drive clean with a dry cloth as required.

• Keep your hands clear of a moving door and any moving parts.

• There is a risk of persons trapping or cutting themselves in/on the door

system's moving parts or edges where it closes.

• All fixing screws on the drive should be properly checked and tightened if

necessary.

• Check the door at least annually, in accordance with the manufacturer’s

instructions.

Cleaning chain and drive unit rail

• The chain (7) or the drive rail (8) is dirty - clean it with a cloth.

• If required, lubricate the chain (7) and the drive rail (8) with

conductive oil.

Do not use grease!

Recommended oil types: Ballistol, WD40 contact spray

Changing bulb duo

• Disconnect plug from socket.

• Undo screw (1).

• Remove light diffuser (2).

• Turn bulb (3) anticlockwise and remove.

• Fit new bulb (32,5 Volt, 34 Watt, BA 15s or 24 Volt, 21 Watt,

BA 15s) and turn clockwise until it locks into position.

Maintenance and Care

1 2 ... 26 27 28 29 30 31 32 33 34 35

Komentarze do niniejszej Instrukcji

Brak uwag

Marathon Sprint Series Instrukcje Operacyjne Strona 31

Komentarze do niniejszej Instrukcji